BRAND NEW - 10" SLIDING COMPOUND MITER SAW!
Features LASER GUIDE for precise cuts.
Getting to know this Miter Saw:
- Laser Switch - Turns on or off the laser guide light.
- Power Switch - inside the handle, just pull the trigger and the saw fires up.
- Switch Handle - This handle contains the power switch. The blade is lowered into the workpiece by pushing / pulling down on the handle.
- Arbor Lock - Allows the user to keep the blade from rotating while tightening or loosening arbor screw during blade replacement or removal.
- Lower Blade Guard / Lower Guard Lip - The lower blade guard helps protect your hands from the spinning blade. It retracts as the blade is lowered. Lip can be used to raise and lower guard if guard becomes jammed on the workpiece.
- Blade - Use only 10" inch (254mm) blades.
- Fence - Supports the workpiece. The fence has a cast in scale to make repetitive cuts easy. The fence also has holes which are used to secure an auxilary fence if desired.
- Kerf Inserts - Kerf Inserts can be adjusted to different blade widths to minimize workpiece tearouts.
- Laser Alignment Screw - Fine tune the angles and direction of the Laser guide light.
- Miter Lock Knob - The miter lock knob locks the miter saw table at any desired miter angle.
- Low Guard Lock Lever - Locks the lower guard.
- Miter Scale / Miter angle Indicator - This scale is cast in on the base of the saw. Indicator is fastened to the table.
- Laser - Laser guide for precise cuts.
Features LASER GUIDE for precise cuts.
Getting to know this Miter Saw:
- Laser Switch - Turns on or off the laser guide light.
- Power Switch - inside the handle, just pull the trigger and the saw fires up.
- Switch Handle - This handle contains the power switch. The blade is lowered into the workpiece by pushing / pulling down on the handle.
- Arbor Lock - Allows the user to keep the blade from rotating while tightening or loosening arbor screw during blade replacement or removal.
- Lower Blade Guard / Lower Guard Lip - The lower blade guard helps protect your hands from the spinning blade. It retracts as the blade is lowered. Lip can be used to raise and lower guard if guard becomes jammed on the workpiece.
- Blade - Use only 10" inch (254mm) blades.
- Fence - Supports the workpiece. The fence has a cast in scale to make repetitive cuts easy. The fence also has holes which are used to secure an auxilary fence if desired.
- Kerf Inserts - Kerf Inserts can be adjusted to different blade widths to minimize workpiece tearouts.
- Laser Alignment Screw - Fine tune the angles and direction of the Laser guide light.
- Miter Lock Knob - The miter lock knob locks the miter saw table at any desired miter angle.
- Low Guard Lock Lever - Locks the lower guard.
- Miter Scale / Miter angle Indicator - This scale is cast in on the base of the saw. Indicator is fastened to the table.
- Laser - Laser guide for precise cuts.
